Specification:
Tubing Reynolds 531 Designer Select (custom mixture of Reynolds 531 and 653) Seat tube length 23" C-T (~58.5 cm) Seat tube angle 72 degrees Top tube length 22 1/2" (~57.2 cm) Head tube angle 72 degrees Fork offset 2" (~5.0 cm) Front centre 60.5 cm Chainstay length 17" (43.2 cm) Bottom bracket drop 7.5 cm Rear spacing 130 mm Miscellaneous:
- Shimano Ultegra cartridge bearing headset.
- Prugnat S4 lugs.
- Engraved Cinelli CC fork crown.
- Reynolds bottom bracket.
- Reynolds dropouts. Rear dropouts have spacers brazed to inside faces to increase chain-frame clearance.
- Single eyelets on front and rear dropouts.
- Rear rack braze-ons on seat stays.
- Double water bottle braze-ons.
- Cantilever braze-ons.
- Sidewall generator braze-on tab on fork.
- Generator lamp braze-on on fork crown.
- Generator wire guides on fork blade and underside of down tube.
- Pump pegs on front of left hand seat stay.
- Braze-on front derailleur tab, positioned for 48T large chainring (but will handle 49T chainring).
Front view, showing the lamp mount on the front of the fork crown, the gear cable routing and the generator cable guides on the underside of the down tube.
Another view of the fork, showing the sidewall generator mount.
View of upper head lug, a Prugnat S4.
View of lower head lug. Also visible are the engraving on the fork crown and the generator cable guides on the fork blade.
A view of the seat tube decal. The motto is "Per-angusta Ad-augusta" - "Through trial to triumph."It depicts a castle ruin that was visible from George's original workshop.
A view of the bottom bracket shell.
Another view of the engraved fork crown.
A view of the seat cluster.
A view of the rear dropout, showing the brazed-on space on the inside face, which maximises chain-frame clearance.
The rear three quarters.
